Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

0

More Views

CCTV MULE - Send upto 4 CCTV Signals down a single BNC Coax Cable

£165.00
  • Buy 5 for £159.00 each and save 4%

Quick Overview

The CCTV Mule makes it easy to add extra cameras to existing installations, you save installation time and reduce the cost of buying and installing more cable. 



The Mules work in pairs One Mule combines the video signals to transmit them down 1 single co-ax, the other Mule then reconstructs the individual video signals at the remote end. A low cost, easy solution that offers huge installation benefits and opportunities to add extra cameras. 



The clever electronics of the CCTV Mule also allow it to carry audio and RS485 data along the same co-axial cable. You can even carry three video signals in one direction and a fourth signal in the other direction! 



The CCTV Mules need a 12V power supply at both ends but other than that, it's a really simple device to use, with no real configuration to do. 



There are 5 modes: 



1, 4 Video signals down 1 co-ax cable. 

2, 3 Video signals in one direction, 1 RS485 signal in the opposite direction. 

3, 3 Video signal in one direction, 1 video signal in the opposite direction. 

4, 3 Video signal in one direction and 1 audio signal. 

5, 3 Video signal in one direction and 1audio signal in the opposite direction 



Sold as a pair.

OR

Details

The CCTV Mule makes it easy to add extra cameras to existing installations, you save installation time and reduce the cost of buying and installing more cable. 

The Mules work in pairs One Mule combines the video signals to transmit them down 1 single co-ax, the other Mule then reconstructs the individual video signals at the remote end. A low cost, easy solution that offers huge installation benefits and opportunities to add extra cameras. 

The clever electronics of the CCTV Mule also allow it to carry audio and RS485 data along the same co-axial cable. You can even carry three video signals in one direction and a fourth signal in the other direction! 

The CCTV Mules need a 12V power supply at both ends but other than that, it's a really simple device to use, with no real configuration to do. 

There are 5 modes: 

1, 4 Video signals down 1 co-ax cable. 
2, 3 Video signals in one direction, 1 RS485 signal in the opposite direction. 
3, 3 Video signal in one direction, 1 video signal in the opposite direction. 
4, 3 Video signal in one direction and 1 audio signal. 
5, 3 Video signal in one direction and 1audio signal in the opposite direction 

Sold as a pair.

© Everything EPOS Limited (2014). All Rights Reserved.