Jump to content
Everything EPOS Forums
Sign in to follow this  

Instructions on how to set up a TMS call

Recommended Posts

1. Connect terminal to internet*
The internet icon will appear green when the terminal is successfully connected.
2. Press Menu, Menu
3. Press Supervisor, then enter password. (Default will be 123456 or 01483.)
4. Press Menu again
5. Press F4 – Call TMS
6. The terminal will dial out and then print out a report 
7. The terminal will dial out again and then print a blank piece of paper. 
8. If the print out shows “Report Completed”, your terminal has been successfully updated. 
If any other error messages appear, please call our support team on 0845 434 7808.

Share this post

Link to post
Share on other sites
Sign in to follow this